Machine Shop Access

Prior to using the Ware Lab machine shop, students with general Ware Lab access must obtain a minimum final grade of B+ in ISE 2214 Manufacturing Processes Laboratory and a minimum score of 85/100 on the machine shop safety quiz posted on Scholar. Students must pass the milling and lathe parts of the shop supervisor’s in-shop machine course. Each part takes about 1.5 hours to compete. Note:

1. Ware Lab shop classes are offered ONLY DURING FALL SEMESTER!
2. In order to be placed on the schedule for machine shop training, you must provide the completed Ware Lab Machine Shop Training Request Form (available in the Resources section on Scholar) to the Shop Supervisor.
3. Classes are conducted on Tuesdays, Wednesdays, and Fridays starting at 1pm (as needed).
4. Each team gets 4 to 5 slots, after that it is first-come, first-serve
5. No-shows with be allowed a second chance only if there are excruciating circumstances for being absent.
6. If you cannot make it to a shop class inform the Ware Lab Shop Supervisor by email before class.
7. You must show your Ware Lab badge (current for that year) to the shop supervisor on the first day of class.
8. Once the machine shop class is completed, you will receive a signed certification card from the shop supervisor
9. You must complete both the milling and lathe samples during the same training period.